10" / 12" Sidewall Socket Fusion Branch Saddle x 1/2" Socket Fusion Outlet ND 250mm / 315mm x 20mm PP-RCT

10" / 12" Sidewall Socket Fusion Branch Saddle x 1/2" Socket Fusion Outlet ND 250mm / 315mm x 20mm PP-RCT

Niron PP-RCT piping products are directly compatible with Aquatherm pipe and fittings

PRODUCT INFORMATION

• The NIRON brand identifies a Random Copolymer Polypropylene (PP-RCT) pipe and fitting system produced by Nupi Americas, manufactured to ASTM F2389 and CSA B137.11 standards.
  
  
• NIRON is a piping system used for all kinds of water applications including hot and cold potable water applications, hydronic heating applications, and both chilled water and cooling tower circulation pipes.
  
  
• The system can be used for large multi-family residential buildings, hotels, hospitals, malls, churches, schools, gymnasiums, cruise liners and merchant ships.
  
  
• The NIRON system is also used in industrial installations for the conveyance of compressed air and several commonly used chemical substances.
  
  
• Niron fittings are compatible with both PPR and PP-RCT piping systems.
  
  
• Can be used with most brands of polypropylene PPR, pipe, fittings, and fusion welding equipment including Aquatherm.
  
  

Sidewall Socket Fusion Branch Saddle x Socket Fusion Outlet Spec Sheet

ADVANCED PP-RCT MATERIAL
Niron is manufactured from 100% Beta PP-RCT material, a highly
crystalline form of PPR which allows for up to twice the pressure
rating at higher temperatures and superior chlorine resistance.

ABSOLUTE RELIABILITY
Produced since 1982, the NIRON system has been sold in all 5
continents. Over 150,000 miles of pipes and fittings have been
shipped with complete customer and installer satisfaction.

CERTIFIED QUALITY
The NIRON system obtained the most prestigious international
quality certificates but to us quality stands for complete
customer satisfaction. This is obtained exclusively through the
supply of products having features that completely fulfil the
application requirements.

COMPLETE RANGE
NIRON pipes and fittings - from 1/2 to 24 inches - are available
in a wide range of fittings and joining methods to solve any
installation problem.

LOW THERMAL EXPANSION
This is obtained thanks to the new composite piping NIRON FG and NIRON
CLIMA produced with an innovative coextrusion technology.
Their inner layer is made of PP copolymer reinforced with fiberglass to reduce
the linear thermal expansion up to 73%.

SPEED OF INSTALLATION
Unquestionably the biggest advantage of NIRON lies in the speed of installation.
Due to easy joining methods, time of installation can be
reduced by 30 to 50%.

NO CORROSION OR SCALING
Polypropylene is a poor conductor of electricity, so the NIRON system is cannot be affected by corrosion.
Furthermore, thanks to its smooth inner surface, any type of lime incrustation is avoided.

ENERGY SAVING        
The low thermal conductivity of polypropylene
allows for considerable energy savings
compared to metallic materials, and reduces
insulation cost.

LOW NOISE INSTALLATION
The noise absorption properties and elasticity of
this material soften noise and vibrations caused by the
water flow and the water hammer effect.

RESISTANCE TO EXTREME TEMPERATURES AND THERMAL EXPANSION
The NIRON system is tested to resist temperatures up to boiling water and freezing conditions.
NIRON FG piping allows thermal expansion to be reduced to levels similar to copper piping.

ABRASION RESISTANCE
The high resistance of NIRON pipes eliminates erosion problems and allows high speed water flow.

NO TOXICITY
The NIRON system is absolutely non-toxic and complies with national and international health
standards.

30 YEAR WARRANTY
The NIRON system is covered by third party liability insurance in accordance